Select Page

How To Split Wood With A Wedge

How To Split Wood With A Wedge

If you landed on this page, then you’re undoubtedly trying to find out how to split wood with a wedge. 

Well, you’re in luck.

In this post, we’re going to show you by using a wedge you can effortlessly split stubborn logs or woods much better than by using an axe.

A wedge is a fantastic tool to do a superb job.  It lets you split wood like a pro.

Sound unbelievable?

Not at all.

Keep reading! And learn how to do the job efficiently.

What Is A Wood Splitting Wedge?

Of course, wood splitting axe is your best friend if you’re a homeowner and need to split firewood or chunks into small and more manageable pieces. However, to tackle the larger log or hardwoods efficiently, a wood splitting wedge is one of the best tools.

Wood Splitting wedge is man’s greatest inventions for manually splitting large round easily. It isn’t a new concept. In fact, it’s an ancient tool, dating back thousands of years. However, the modern splitting wedges are much more advanced than those of our ancestors used.

Splitting wedge is a triangular-shaped hunk of metal. It closely resembles a maul head. It is a specially designed tool to make the wood burst more easily for large logs and hardwoods. These are made of extremely sturdy steel. In general, they can resist even the 18.5 tons force in the long term.

Splitting wood with a wedge is a great way to process even the largest logs in no time. Obviously, splitting wedges are better than any professional folding saws or chainsaw to split large log or hardwood.

How To Split Wood With A Wedge


To follow the proper technique is essential when using a splitting wedge.  In fact, it takes patience and some practice to get good at to split wood with a wedge. Here, we’ve included a few tips to get you started.

#1 Arrange the necessary tools

Things you may need

  • A wedge
  • A wood splitting axe
  • A sledgehammer
  • Chopping block

#2 Wear the protective gear

Safety will be the priority. No matter your splitting method, don’t forget to wear sturdy steel-toed boots, long pants, long-sleeve shirt, and work gloves before start splitting wood with a wedge. It’ll help you to avoid possible injury and provide added stability. Also, wear protective safety glasses to prevent splinters.

#3 Set up a safe splitting 

The splitting station must be clear with no debris or overhanging branches. There should not have any hazards to fall on or trip over.

Remove all the small limbs, plants and other potentially dangerous items from the splitting site. The ground where you will work needs to be flat and solid so that you can stand firm when swinging.  Work in a spot that is dry to avoid you slip. Practice cautions.

#3 Use a chopping block 

You need a chopping block as a solid backstop. It can be an old stump or sections of hardwood tree. The chopping block must feature a flat, large surface. The trunk of a tree that is 6-inch in height and 18-inch or larger will work fine.

A chopping block will provide support for the log you plan to split. It makes splitting easier and also prevent possible damage to your splitting tool. However, for ripping a log, using a chopping block isn’t necessary.

Chopping block raises the log off the ground. As a result, it reduces the strain of splitting wood. It also helps catch glancing blows from the splitting tool.

Splitting Wood Using Splitting Wedges- Step By Step

Step 1: Put the log you intend to split in the middle of the chopping block.

Step 2: Embed the splitting wedge on the log to keep it in place. If there is any pre-existing crack, embed the wedge firmly into it.

Step 3: Stand back from the chopping block. Spread out your legs about 2 ft. apart. Move your lead foot (the foot opposite to your strongest arm) slightly forward.

Step 4: Grab the sledgehammer and aim your mark.

Step 5: Raise the sledgehammer over your head.

Step 6: Firmly swing down the sledge hammer above your right (or left if you’re left-handed) shoulder while sliding your hand down to guide the tool.

Step 7: Strike the flat wedges side. You may need 2 or more attempts at the first time. However, with practice, you can do the job with only one stroke.

Step 8: If the first wedge gets stuck into the log, hammer another wedge in the same split to free it. With a few good sledges, the log will split apart.

This method of Splitting Wood Using Wedges is a great way to split those large, tough, and round logs. A sledgehammer and few splitting wedges will make your job quicker and easier.

You don’t absolutely have to use a splitting wedge to split your log. But if you need split a bulk of the woods, there is no reason not to use this amazing tool. In fact, this tiny tool will speed up your work, and it’s also safe to use.

How To Split Thick- Barked Wood/ Knotty Wood With A Splitter Wedge

Thin-barked and straight grain woods are easy to split with a wedge. However, there are some cases when log may not split even after some attempts. If the wood is thick-barked, has a twisted/ curled grain or extremely knotted, it’ll be more difficult to split the log.

No worry!

There is a solution, too.

Follow our guidelines.

  • Keep the knotted log you plan to split on the chopping block.
  • Find any pre-existing cracks on the log.
  • If any, aim at the pre-existing crack.
  • Keep your eye on the mark and raise the hammer above your head
  • Swing the hammer down with force but in a controlled motion.
  • Keep hitting the flat surface of the wedge until the log pops in halves.

For split in smaller pieces, split the halves following the same method.

Expert’s Tips

Tip 1: If you clop the wood directly against the ground, there is a risk the hammer and working piece flying off at the wrong direction.

Tip 2: If the wedge has a dull cutting edge, you have to put more effort to get the job done. On the negative side, the chopping block will absorb the force of each blow. Moreover, it’ll give a spot for the wedge to break through if you miss the aim. So, make sure, the edge of the wedge is sharp enough.

Tip 3: If you’re left-handed, your lead foot will be the right foot and vice-versa.

Tip 4: Look the crack or weak spots on the log so that the wood naturally splits. If there is more than one crack, try the crack radiating from the center of the log.

Tip 5: If there is no visible crack on the log, tap the wedge straight down the middle.

Tip 6: Try to embed the wedge at least 1 ½ inch in the log, so that it won’t fly off when struck.

Tip 7: Be sure to have several wedges on hand. If the first wedge stuck into the log and you need to use another wedge into the crack, drive the second wedge along the same crack but closer to the center.

Tip 8: Once you have done, you need to remove the wedge first before using another tool (such as maul) to split the entire log.

Tip 9: To remove the wedge from the log, strike its body with the hammer. As a result, the wedge will loosen from the split. It may require some efforts, but don’t hit it too hard and don’t hurry.

Tips 10- safety tip

Avoid working alone. Try to keep your buddy around so that he can help watch out for any danger. If any medical emergency arises, your safety spotter can call for help.

So, now you know how to split wood with a wedge effortlessly.  Don’t be terrified the upcoming winter.

Split seasonal woods or stubborn logs with wedge.

And Keep your home warm all the winter long!

Hope, our guidelines have helped you a lot.

Thanks for reading.

About The Author

Leave a reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: